HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Adding Multi-Initiator Support
Chapter 258
Multi-Initiator Support for Itanium-Based System
If you need multi-initiator support for HP A6829A SCSI HBA installed
in an Itanium-based system, perform the following steps:
Step 1. Ensure that the part number of the HBA is A6829A-60101.
Step 2. Install the driver patch, PHKL_28566.
Multi-Initiator Support for PA-RISC Based System
If you need multi-initiator support for HP A6829A SCSI HBA installed
in a PA-RISC based system, perform the following steps:
Step 1. Ensure that the part number of the HBA is A6829A-60101.
Step 2. Install the appropriate driver patch. Refer to Table 2-5 for information
on the patch you need to install on your system.
Table 2-5 Mapping of System Version to Driver Patch
System Version Driver Patch
HP-UX 11.0 PHKL_27555
HP-UX 11i PHKL_27556