HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Installing the A6829A Adapter
Using the EFI Flash Utility
Chapter 2 65
LSI Logic Corporation EFI 53C8xx/53C1010 FLASH Utility.
EFI8XXFL-1.00.00.00 (05.05.2003)
Copyright (c) 2003 LSI Logic Corporation. All rights reserved.
********************************************************************
FLASH
a - Identify Flash Image
b - Download New Flash Image
c - Upload Current Flash Image to a File
d - Erase Entire Flash Part
MISC
z - Change Current PCI chip/adapter
q - Quit
Selection:
In the preceding menu, the banner at the top of the option menu displays
the version of the EFI update utility and the release date.
The details on each of the menu choices are as follows:
a Identify Flash Image: Displays the version number of the image in
the flash memory associated with the currently selected chip or the
image contained in the firmware image file.
b Download New Flash Image: Overwrites the flash memory associated
with the currently selected chip with a new firmware image file. This
menu choice prompts you for a file name.
NOTE The EFI utility does not flash an image that exceeds the capacity of the
flash memory on the selected HBA. Instead, a warning message is
displayed.
c Upload Current Flash Image to a File: Saves the image from the
flash memory associated with the currently selected chip to a file. This
menu choice prompts you for a file name.
d Erase Entire Flash Part: Erases the entire flash memory
associated with the currently selected chip. Once the flash memory is
erased, you must download a new Flash image (select option [b]) before
the HBA is able to function in the boot sequence.
When the EFI utility flashes an adapter, the following message is
displayed: