HP A6829A PCI Dual Channel Ultra160 SCSI Host Bus Adapter Service and User Guide (May 2003)

Troubleshooting
Setting and Confirming SCSI Parameters
Chapter 374
Setting and Confirming SCSI Parameters
You can ensure compatibility between the SCSI controller and SCSI
devices using the commands available for setting and displaying the
appropriate SCSI bus parameters, including SCSI IDs.
The procedure varies depending on which system the HP A6829A host
bus adapter is installed in.
For HP A6829A HBAs installed in PA-RISC based systems, see “Setting
and Confirming SCSI Parameters for HP A6829A Host Bus Adapters
Installed in PA-RISC Based Systems” on page 75.
For HP A6829A HBAs installed in Itanium-based systems, see “Setting
and Confirming SCSI Parameters for HP A6829A Host Bus Adapter
Installed in Itanium‚-Based Systems” on page 80.