HP A7143A RAID160 SA Controller Support Guide

Troubleshooting

The sautil Command

Chapter 6 129

sautil <device_file> accept_media_xchg

<logical_drive_number>

The sautil <device_file> accept_media_xchg

<logical_drive_number> command instructs the RAID160 SA

controller to:

1. Set the state of the specified failed logical drive,

<logical_drive_number>, to "OK"

2. Set the states of all failed physical disks that have been replaced via

hot-plug exchanges to "OK"

WARNING This option preserves the RAID configuration, logical drive

configurations, and controller settings. If more disks failed than the

RAID level is able to accommodate, data on the failed logical drive may

have been compromised. If data has been compromised you will need to

restore from backup media.

In the following example, logical drive “0” accepts a media exchange:

# sautil /dev/ciss6 accept_media_xchg 0

******************************************************************************

**** ****

**** S A U T I L S u p p o r t U t i l i t y ****

**** ****

**** for the HP A7143A RAID160 SA SCSI Adapter ****

**** ****

**** version A.01.01 ****

**** ****

******************************************************************************