HP A7143A RAID160 SA Controller Support Guide

Troubleshooting
The sautil Command
Chapter 6130
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- ADAPTER INFORMATION -----------------------------------------------------
Adapter............................. HP A7143A RAID160 SA SCSI Adapter
Hardware Path....................... 0/6/2/0
Device File......................... /dev/ciss6
---- ACCEPT MEDIA EXCHANGE ---------------------------------------------------
Logical drive specified: 0
WARNING: The status of logical drive 0 will be set to "OK". The
status of all physical disks that have been replaced on this
logical drive will also be set to "OK".
While this option preserves the RAID configuration (logical
drive configurations, adapter settings, etc.), data on the
failed logical drive may have already been compromised. If
more disks have failed than the RAID level can accommodate,
you will need to restore your data from backup media.
Do you want to continue (y/n)?
******************************************************************************
**** End of SAUTIL Output ****
******************************************************************************