HP A7143A RAID160 SA Controller Support Guide

Controller Specifications
RAID160 SA Controller Specifications
Appendix B138
RAID160 SA Controller Specifications
Table B-1 RAID160 SA Specifications
Dimensions 31.5 cm x 10.8 cm x 1.5 cm
(12.4 in x 4.3 in x 0.6 in)
Power Required 24.9 W (19.0 W at 3.3 V, 5.9 W at 5 V)
Battery 2 NiMH battery packs, rechargeable.
PCI Specification The RAID160 SA controller complies with PCI
revision 2.2
PCI Bus Transfer Rate Up to 528 MB/s
Supported RAID Levels 0, 1, 1+0, 5, and ADG
Number of channels 4
Number of drives per channel Up to 14
Connector Type Four VHDCI External, Two 68-pin Wide
Internal
Termination Termination is required, but it is provided
automatically on the supported HP systems.
SCSI Transfer rate Up to 160 MB/s (40 MHz) per channel
Cache Size 256 MB (224 MB usable, 32 MB transfer
buffer)
Operating Temperature Range 10× to 35×C (50× to 95×F)
Shipping Temperature Range -30× to 60×C (-22× to 140×F)
Operating Relative Humidity
(non-condensing)
20% to 80%
Non-Operating Relative
Humidity (non-condensing)
5% to 90%