HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller
Installing Software for the RAID160 SA Controller
Chapter 4 53
Installing Software for the RAID160 SA
Controller
The drivers, utilities and manpages for the RAID160 SA controller are
contained in the RAID-01 bundle located in the “pci 4-channel raid160 sa
scsi controller” depot, see “Locating Software for the RAID160 SA
Controller”. They can be installed using the Software Distributor (SD).
The SD is a tool for installing software on HP-UX host systems. The SD
can also be used to remove software from HP-UX host systems.
The instructions for using the SD to install or remove the drivers,
utilities and manpages for the RAID160 SA controller can be downloaded
at the HP Software Depot, see “Locating Software for the RAID160 SA
Controller”.
The RAID-01 bundle is composed of several files that will be copied to the
appropriate directories on the host system.
The SD will add the following files to an HP-UX host configuration:
• /usr/conf/lib/libciss.a
This is the library of 64-bit object modules that must be linked into
the HP-UX kernel
• /usr/conf/lib/ciss_dbg.o
This is the 64-bit debug object module that must be linked into the
HP-UX kernel
• /usr/conf/master.d/ciss
This is the master file
• /opt/raidsa/bin/sautil
This is the support tool. sautil is an abbreviation for “Smart Array
Support Utility”