HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller
RAID160 SA Controller OLAR Error Recovery
Chapter 464
OLAR Error Recovery
If the SCSI cables are disconnected from, or connected to, a controller
after the PCI slot is powered off, the OLAR procedure will fail and the
following message will appear (see Figure 4-4, “First Error Message,”):
Figure 4-4 First Error Message
At this point the controller is suspended and will remain suspended,
unless the following steps are followed:
1. Click “OK” on the first error message (see Figure 4-4, “First Error
Message,”)
2. The following message will appear (see Figure 4-5, “Second Error
Message,”).
Figure 4-5 Second Error Message