HP A7143A RAID160 SA Controller Support Guide
Installing the RAID160 SA Controller
RAID160 SA Controller Firmware
Chapter 4 77
An example of the lengthy sautil <device_file> command output is
provided in “The sautil Command” on page 115 in the Troubleshooting
chapter.
Issuing the sautil <device_file> -s command provides an
abbreviated listing of information for the RAID160 SA controller and all
connected devices, including the firmware version currently in ROM.
# sautil /dev/ciss6 -s
******************************************************************************
**** ****
**** S A U T I L S u p p o r t U t i l i t y ****
**** ****
**** for the HP A7143A RAID160 SA SCSI Adapter ****
**** ****
**** version A.01.01 ****
**** ****
**** (c) Copyright 2003 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- ADAPTER INFORMATION -----------------------------------------------------
Adapter............................. HP A7143A RAID160 SA SCSI Adapter