HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller

Physical Disk Firmware

Chapter 4 89

Issuing the sautil <device_file> -s command provides an

abbreviated listing of information for the RAID160 SA controller and all

connected devices including a SCSI Device Summary that lists the

SCSI channel and the SCSI ID for each of the physical disks attached to

the RAID160 SA controller. The firmware version currently installed on

each physical disk is also included in the output of the

sautil <device_file> -s command:

# sautil /dev/ciss6 -s

******************************************************************************

**** ****

**** S A U T I L S u p p o r t U t i l i t y ****

**** ****

**** for the HP A7143A RAID160 SA SCSI Adapter ****

**** ****

**** version A.01.01 ****

**** ****

******************************************************************************

---- DRIVER INFORMATION ------------------------------------------------------

Driver State........................ READY

---- ADAPTER INFORMATION -----------------------------------------------------

Adapter............................. HP A7143A RAID160 SA SCSI Adapter