HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller
Physical Disk Firmware
Chapter 494
| |
| * * |
| * * * * |
(Ch 3)---> * * * * <--- (Ch 4)
| * * * * |
| * * |
| |
| |
~ ~ ~ ~ ~
******************************************************************************
**** End of SAUTIL Output ****
******************************************************************************
In the example above, the SCSI Device Summary lists the SCSI
channel and the SCSI ID for each of the physical disks attached to the
RAID160 SA controller. The information provided for each of the physical
disks, following the SCSI Device Summary, indicates that all of the
physical disks have firmware version HPB3 installed.
Updating Physical Disk Firmware
The sautil physical disk firmware update command syntax is:
sautil <device_file> download_dev_fw <fw_image> <ch>:<id>
where:
<device_file> is the controller device file. The RAID160 SA
controller device file can be determined by issuing the ioscan -kfn
command as illustrated in “Determining the RAID160 SA Device
File” on page 87.
<fw_image> is the file path for the firmware version you want to
install on the RAID160 SA controller. You will need to contact your
HP representative for access to the physical disk firmware image
update file.