HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller

Physical Disk Firmware

Chapter 4 95

<ch>:<id> is the SCSI channel and the SCSI ID of the physical disk

you want to change the firmware on. The SCSI channel and the SCSI

ID for each physical disk connected to the RAID160 SA controller can

be determined from the SCSI Device Summary contained in the

output of the sautil <device_file> command or the sautil

<device_file> -s command as illustrated in “Determining the

SCSI Channel, the SCSI ID, and the Firmware Version for Physical

Disks” on page 88.

When the

sautil <device_file> download_dev_fw <fw_image> <pdev_id>

command is issued, the physical disk firmware version that is currently

installed will be listed along with the firmware version you selected to

replace it with. You will have the opportunity to proceed with the

download or cancel:

NOTE This procedure will need to be repeated for each physical disk that you

want to update the firmware on.

# sautil /dev/ciss6 download_dev_fw HPB4d849.lod 1:0

******************************************************************************

**** ****

**** S A U T I L S u p p o r t U t i l i t y ****

**** ****

**** for the HP A7143A RAID160 SA SCSI Adapter ****

**** ****

**** version A.01.01 ****

**** ****

******************************************************************************