HP A7143A RAID160 SA Controller Support Guide

Installing the RAID160 SA Controller
Setting up a RAID160 SA Controller As a Boot Device
Chapter 4102
Step 10. Select the kind of installation (Guided or Advanced) you want to do.
The installation starts, and the Ignite-UX graphical interface (GUI)
appears.
Step 11. Under the “Basic” tab, select the configuration to use according to the
HP-UX system you are using.
Step 12. Still under the “Basic” tab, for the root disk for the installation, select the
RAID160 SA logical drive you want to install the HP-UX operating
system on.
Step 13. Continue with (and finish) the installation as usual.
Step 14. Once the installation has completed, you can boot from that RAID160 SA
logical drive.