HP AD279A PCI 64-Port Serial Multiplexer Installation Guide, September 2006

HP PCI 64-Port Serial Multiplexer Adapter Installation

HP AD279A PCI MUX 64-Port Adapter Installation Prerequisites

Chapter 1

NOTE The AD279A PCI MUX 64-port adapter supports maximum of four port modules and allows

intermixing of port modules (HP 16-port RS-232 DB25 port module and HP 16-port RS-232 RJ45

port module).

Step 3. Attach auxiliary power supplies to third and fourth port modules, and plug power supplies into AC

receptacles. The power supply requires 110-220 V and 50-60 W AC input.

Connecting Port Modules to the AD279A PCI MUX 64-Port Adapter

A port module (DB-25 and RJ-45) is an interface between the AD279A PCI MUX 64-port adapter and the

RS-232 peripheral device. The module is connected to the adapter, as shown in Figure 1-2.

Figure 1-2 Port Modules Connected to the Adapter

Hardware Requirements

Table 1-1 lists servers that support AD279A PCI MUX 64-port adapter.

Table 1-1 AD279A PCI MUX 64-Port Server Support

Server/Wo

rkstation

Class

Number of

AD279A PCI

MUX 64-Port

Adapters

Supported

Supported Platforms

HP-UX 11i v1 HP-UX 11i v2

rp2470 PA-RISC 1 Yes Yes

rp3410 PA-RISC 2 Yes Yes

rp3440 PA-RISC 3 Yes Yes

rp4440 PA-RISC 6 Yes Yes

rp7410 PA-RISC 15 Yes Yes