HP AD279A PCI 64-Port Serial Multiplexer Installation Guide, September 2006

HP PCI 64-Port Serial Multiplexer Adapter Installation

HP AD279A PCI MUX 64-Port Adapter Installation Prerequisites

Chapter 1

NOTE For latest information about the platform support, see Support Matrix document at:

http://www.docs.hp.com/en/netcom.html#Multiplexers

Slot Limitations

Table 1-2 lists the slot limitations on the following servers:

Software Requirements

The AD279A PCI MUX 64-port adapter is supported on HP-UX 11i v1 and HP-UX 11i v2 operating systems.

To ﬁnd out the version of the operating system installed on your system, run the following command at the

command prompt:

$ uname -r

If HP-UX 11i v1 is installed on your system, the following output is displayed:

B.11.11

If HP-UX 11i v2 is installed on your system, the following output is displayed:

B.11.23

rp7420 PA-RISC 15 Yes Yes

rx2620 Itanium-based 3 No Yes

rx4640 Itanium-based 6 No Yes

rx5670 Itanium-based 4 No Yes

rx7620 Itanium-based 15 No Yes

rx8620 Itanium-based 16 No Yes

Table 1-2 Server Slot Limitations

Server/Workstation

AD279A PCI MUX 64-Port

Adapter not Supported on

rp2470 Slot 2, 3, and 4

rp3410 Slot 4

rp3440 Slot 4

rx2620 Slot 4

Table 1-1 AD279A PCI MUX 64-Port Server Support (Continued)

Server/Wo

rkstation

Class

Number of

AD279A PCI

MUX 64-Port

Adapters

Supported

Supported Platforms

HP-UX 11i v1 HP-UX 11i v2