HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-01 (fcd) Driver
Table 6 A6826A LED States (continued)
Recommended ActionProbable Cause1 Gb Link (Amber)2 Gb Link (Green)
No action is required.1 Gb link-upOnOff
No action is required.2 Gb link-upOffOn
No action is required.Activity on 1 Gb link5 Flash/secondOff
No action is required.Activity on 2 Gb linkOff5 Flash/second
Table 7 AB378A, AB378B, AB379A & AB379B LED States
Recommended ActionProbable Cause1 Gbps Link
(Amber)
2 Gbps Link (Green)4 Gbps Link
(Yellow)
Power on the system.Power offOffOffOff
No action is required.Power on (before
firmware initialization)
OnOnOn
No action is required.Power on (after
firmware initialization)
1 flash/second1 flash/second1 flash/second
No action is required.Firmware Fault2 flashes/second2 flashes/second2 flashes/second
No action is required.1 Gb Link UP/ACTOn, blinkingOffOff
Contact HP for assistance.2 Gb Link UP/ACTOffOn, blinkingOff
No action is required.4 Gb Link UP/ACTOffOffOn, blinking
No action is required.Beacon.3 flashes/second3 flashes/second3 flashes/second
fcmsutil
Use the fcmsutil command-line diagnostic tool with the following host bus adapters:
• 451871-B21
• AH400A
• AH401A
• 403619-B21
• AD193A
• AD194A
• AD300A
• AB378B
• AB379B
• AB378A
• AB379A
• A6826A
• A9782A
• A9784A
• AB465A
Use the fcmsutil command to perform test and echo functions, read card registers, and display
information such as the N_Port ID, Node World-Wide Name, Port World-Wide Name, link speed,
chip revision number, Vital Product Data (VPD) information and more. When you use fcmsutil
14 Troubleshooting and Maintenance