HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes HP-UX 11i v2 Manufacturing Part Number: J2635-90034 September 2007 © Copyright 2006-2007 Hewlett Packard Development Company, L.P.
Legal Notices Copyright 2006-2007 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
1 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Chapter 1 3
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Overview Overview This document discusses the most recent product information pertaining to FibrChanl-00 (td) HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Version 11.23.0709, which is provided with HP-UX 11i v2.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Driver Versions Driver Versions Table 1-1 lists the driver versions for each release of the Fibre Channel driver. Table 1-1 Release Application Release 1201 Fibre Channel Driver Version History HP-UX 11.00 B.11.00.10 (32-bit or 64-bit) HP-UX 11i v1 HP-UX 11i v1.6 HP-UX 11i v2.0 B.11.11.09 (32-bit or 64-bit) 11i v1.6 OE Release B.11.22.01 (64-bit) 11i v2.0 OE Release B.11.23.01 (64-bit) Application Release 0304 B.11.23.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Installation Prerequisites Installation Prerequisites You must install the following software and patch before installing the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver on the system: • Fibre Channel Mass Storage (FCMassStorage) driver. You can download the driver bundles from the HP Software Depot at: http://h20293.www2.hp.com/ http://itresourcecenter.hp.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes What is New in This Version What is New in This Version This version of the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver contains only defect fixes and does not offer any new feature. For information about the defect fixes, see “Defects Fixed in This Release” on page 9.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Verifying Installation of the HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Verifying Installation of the HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver To verify whether the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully on your system, enter the following command at the HP-UX prompt: # swlist FibrChanl-00 Where: FibrChanl-00 is the bundle name for the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Defects Fixed in This Release Defects Fixed in This Release Table 1-2 lists the defects fixed in this release of the Fibre Channel PCI Tachyon TL/TS/XL2 driver. Table 1-2 Defects Fixed in the HP-UX 11i v1 Operating System Number JAGag40950 Chapter 1 Description When a data protector backup is initiated in a SAN environment, system crashes with an HPMC in the Fibre Channel (td) driver.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Related Information Related Information For more information about the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver, see the following documentation available at: http://docs.hp.com/en/netcom.html#Fibre%20Channel Support Guide This document provides a product overview, and discusses additional features and regulatory information. It also describes how to install, configure, troubleshoot, and maintain the driver.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Software Availability in Native Languages Software Availability in Native Languages The HP PCI Tachyon TL/TS/XL2 Fibre Channel driver software is available in the English language only.
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes Software Availability in Native Languages 12 Chapter 1
