HP PCI-X 2-port 4X Fabric (HPC) Adapter Release Notes HP Fabric for InfiniBand B.11.23.05 HP-UX 11i v2 Manufacturing Part Number: J6376-90012 April 2006 Printed in the US © Copyright 2004-2006 Hewlett-Packard Development Company L.P.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
HP PCI-X 2-port 4X Fabric (HPC) Adapter What’s New HP PCI-X 2-port 4X Fabric (HPC) Adapter This Release Note provides clarification on the interaction with HyperFabric and alerts users to updates in the Administration Guide What’s New Minimum System Memory Requirements per Card The minimum system memory requirements is 512 MB per AB286A/C HCA installed.
HP PCI-X 2-port 4X Fabric (HPC) Adapter What’s New Number of Spigots(Ports) on IA : 2 Spigot specific Information Spigot identifer : 1 Spigot online : YES Num Network Addresses : 1 Primary Network Address : fe80::d:9dff:ffff:db9 Spigot identifer : 2 Spigot online : YES Num Network Addresses : 1 Primary Network Address : fe80::d:9dff:ffff:dba ======================================================================== General Information: =====================================================================
HP PCI-X 2-port 4X Fabric (HPC) Adapter Known Problems and Issues Spigot online : YES Num Network Addresses : 1 Primary Network Address : fe80::2:c902:40:2a26 Known Problems and Issues Some sx2000 Users Must Replace Their I/O Chassis sx2000 users whose I/O chassis part number is A9386-2101B (stamped “A9836-0002C” on the front panel), and who plan to use both InfiniBand ports of the AB286C Adapter, must replace their I/O chassis. Compatible chassis are stamped “A9386-0002D”.
HP PCI-X 2-port 4X Fabric (HPC) Adapter Product Documentation Do not use the Attention Button method of On-Line Addition and Replacement (OL*) to replace an existing HP Fabric Clustering System HCA, as the slot will not power off. Use the Command Line Interface, or Peripheral Device Tool graphical user interface (GUI) to replace an HP Fabric Clustering System HCA. Refer to the Interface Card OL* Support Guide, available on http://www.docs.hp.com for details on using standard OL* features.