HP StorageWorks A6826A PCI-X Host Bus Adapter for Linux 64-bit Systems Installation Guide (November 2003)

Adapter Features
16 A6826A PCI-X Host Bus Adapter for Linux 64-bit Systems Installation Guide
Physical Specifications
Table 3 lists the HBA specifications.
Table 3: HBA Specifications
Type Specification
Host bus Conforms to PCI Local Bus Specification, Revision 2.2
Fibre Channel
specifications
Bus type: fiber optic media
Bus transfer rate:
200 MBps maximum at half duplex
400 MBps maximum at full duplex
Interface chip: ISP2312
Central processing
unit (CPU)
Single-chip design that includes a RISC processor, Fibre
Channel protocol manager, PCI-XDMA controller,
integrated serializer/deserializer (SEREDES), and
electrical transceivers that can auto-negotiate a data rate
of 1 Gbps or 2 Gbps.
RAM 256 KB per Fiber Channel Controller; Scalable to 4 MB
NVRAM 256 KB, field programmable
Flash 128 KB of flash ROM in two 64 KB, software selectable
banks, field programmable
Onboard DMA Five-channel DMA controller: two data and one
command, one auto-DMA request, and one auto-DMA
response.
Frame Buffers Integrated 10 KB frame buffer FIFOs (6 KB receive and
4KB transmit) for each data channel.
Connectors LC-style connector that supports non-OFC, multimode
fiber optic cabling using a small form factor optical
transceiver module.
Form factor 17.78 cm x 10.67 cm (7.0 in x 4.2 in)
Power Consumption (66MHz PCI-X Optic)
Single Channel ~4.75 Watts
Dual Channel ~10.5 Watts