HP-UX 11i v2 Network Command Differences when Using HP BL860c and BL870c Server Blades

ManualsBrandsHP ManualsNetwork HardwareHP-UX 11i v2 I/O Cards

HP-UX 11i v2 Network Command Differences when Using HP BL860c

and BL870c Server Blades

For igelan Driver Version B.11.23

HP C-Class Blade Systems

December 07

Printed in the U.S.A.

Summary of content (4 pages)

PAGE 1
HP-UX 11i v2 Network Command Differences when Using HP BL860c and BL870c Server Blades For igelan Driver Version B.11.23 HP C-Class Blade Systems December 07 Printed in the U.S.A. © Copyright 2007 Hewlett-Packard Development Company, L.P.
PAGE 2
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
PAGE 3
HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades Following is an explanation of how to use HP-UX 11i v2 networking commands with the HP BL860c and BL870c Server Blades.
PAGE 4
HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades HP-UX 11i v2 Network Command Differences when Using BL860c and BL870c Server Blades • HP-UX 11i v2 command ioscan does not report the media type of the internal LAN-on-motherboard (LOM) on the HP BL860c and BL870c as either 1000Base-SX or 1000Base-T, whereas for LAN cards in non-blade servers, ioscan does show the media type.