HP-UX Fibre Channel (fcd, fclp) and FlexFabric FCoE (fcoc) Host Bus Adapter Support Matrix, February 18, 2014

ManualsBrandsHP ManualsNetwork HardwareHP-UX 11i v2 I/O Cards

HP-UX Fibre Channel Host Bus Adapter support matrix Page 1 of 13

February 18, 2014

Adapter Hardware platform

Minimum system

firmware

requirements

Recommended

adapter firmware

Boot

support

Operating system

Driver bundle OL* support Notes

Superdome 2

SFW 3.6.48 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

Yes

OL* supported with SD2 fw 3.6.48(or bundle 2012.12) or newer

rx2800 i2 SFW 1.95 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

rx2800 i4 SFW 2.40 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

Superdome 2

SFW 3.6.48 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

Yes

OL* supported with SD2 fw 3.6.48(or bundle 2012.12) or newer

rx2800 i2 SFW 1.95 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

rx2800 i4 SFW 2.40 or later

FW 6.07.02 or later

UEFI 6.13 or later

Yes HP-UX 11iv3 1309 or later

FibrChanl-01

minimum version

11i v3: B.11.31.1309

recommended version

11i v3: B.11.31.1309

BL860c i2, BL870c i2,

BL890c i2

SFW 1.24

FW 4.2.401.2212

UEFI 5.10.a7

Yes

HP-UX 11i v3 1109 or later

FibrChanl-03

minimum version

11i v3: B.11.31.1109

recommended version

11i v3: B.11.31.1204

BL860c i4, BL870c i4,

BL890c i4

SFW 2.29

FW 4.2.401.2212

UEFI 5.10.a7

Yes

HP-UX 11i v3 1209 or later

FibrChanl-03

minimum version

11i v3: B.11.31.1209

The following matrix will be useful if you are adding a HP Fibre Channel (fcd and fclp) or FlexFabric FCoE (fcoc) Host Bus Adapter to a system.

Use this Support Matrix to check which bundle you need when adding Fibre Channel or FlexFabric FCoE HBAs.

For the latest EFI driver and firmware, go to: http://welcome.hp.com/country/us/en/support.html and search using product number under Drivers&Software link.

HP-UX Fibre Channel (fcd, fclp) and FlexFabric FCoE (fcoc) Host Bus Adapter Support Matrix February 18, 2014 5900-3269

B9F24A (QW972-63001) PCIe Dual port

16Gb QLogic Fibre Channel HBA

B9F23A (QW971-63001) PCIe Single port

16Gb QLogic Fibre Channel HBA

NC553m (613431-B21) 10Gb Emulex

Mezzanine (with Virtual Connect)

1 17

Flex Fabric FCoE HBA

Summary of content (13 pages)

PAGE 1
HP-UX Fibre Channel (fcd, fclp) and FlexFabric FCoE (fcoc) Host Bus Adapter Support Matrix February 18, 2014 5900-3269 The following matrix will be useful if you are adding a HP Fibre Channel (fcd and fclp) or FlexFabric FCoE (fcoc) Host Bus Adapter to a system. Use this Support Matrix to check which bundle you need when adding Fibre Channel or FlexFabric FCoE HBAs. February 18, 2014 For the latest EFI driver and firmware, go to: http://welcome.hp.com/country/us/en/support.
PAGE 2
Adapter Hardware platform Minimum system firmware requirements BL860c i2, BL870c i2, BL890c i2 SFW 1.24 FW 4.2.401.2212 UEFI 5.10.a7 Yes BL860c i4, BL870c i4, BL890c i4 SFW 2.29 FW 4.2.401.2212 UEFI 5.10.a7 Yes HP-UX 11i v3 1209 or later BL860c i4, BL870c i4, BL890c i4 SFW 2.29 FW 4.1.450.14 UEFI 5.02.a4 Yes HP-UX 11i v3 1209 or later BL860c i2, BL870c i2, BL890c i2 SFW 1.24 FW 4.2.401.2212 UEFI 5.10.a7 Yes BL860c i4, BL870c i4, BL890c i4 SFW 2.29 FW 4.2.401.2212 UEFI 5.10.
PAGE 3
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support Notes FibrChanl-02 SFW 1.01 FW 2.02x2 EFI 4.01a5 BL860c i2, BL870c i2, BL890c i2 BL860c i4, BL870c i4, BL890c i4 BL860c, BL870c Yes 2 SFW 1.07 FW 2.02x2 EFI 4.01a5 Yes 2 SFW 2.29 FW 2.02x2 EFI 4.01a5 Yes HP-UX 11i v3 0903 or later minimum version 11i v3: B.11.31.0903 recommended version 11i v3: B.11.31.
PAGE 4
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support Notes FibrChanl-01 Any SFW FW 5.06.06 EFI 2.27 BL860c i2, BL870c i2, BL890c i2 BL860c i4, BL870c i4, BL890c i4 BL860c, BL870c Yes 3 SFW 1.07 FW 5.06.06 EFI 2.27 Yes 3 HP-UX 11i v3 1003 or later SFW 2.29 FW 5.06.06 EFI 2.27 Yes2 HP-UX 11i v3 1209 or later HP-UX 11i v3 0903 or later minimum version 11i v3: B.11.31.
PAGE 5
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support Notes FibrChanl-03 Superdome 2 AT111A HP Integrity CN1100E PCIe 2-port Converged Network Adapter 17 SFW 2.26 FW 4.2.401.2212 UEFI 5.10.a7 SFW S26.21 FW 4.2.401.2212 UEFI 5.10.a7 SFW 2.29 FW 4.2.401.2212 UEFI 5.10.a7 Yes HP-UX 11i v3 1109 or later minimum version 11i v3: B.11.31.1109 recommended version 11i v3: B.11.31.
PAGE 6
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support FibrChanl-02 Superdome 2 Any SFW FW 2.82X4 EFI 4.01a5 Any SFW FW 2.82X4 EFI 4.01a5 SFW 2.29 FW 2.82X4 EFI 4.01a5 Yes HP-UX 11i v3 1009 or later AD221A 18 PCIe Combo 1-port 4 Gb FC and 1-port 1000Base-T (copper) Adapter AD222A 18 PCIe Combo 2-port 4 Gb FC and 2-port 1000Base-T (copper) Adapter minimum version 11i v3: B.11.31.
PAGE 7
Adapter AH400A PCIe Single Port 8 Gb QLogic Fibre Channel HBA Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support FibrChanl-01 Superdome 2 Any SFW AH401A PCIe Dual Port 8 Gb QLogic Fibre Channel HBA FW 5.06.06 EFI 2.27 Yes HP-UX 11i v3 1009 or later minimum version 11i v3: B.11.31.1009 recommended version 11i v3: B.11.31.
PAGE 8
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support FibrChanl-02 Superdome 2 Any SFW FW 2.02x2 EFI 4.01a5 Yes HP-UX 11i v3 1009 or later minimum version 11i v3: B.11.31.1009 recommended version 11i v3: B.11.31.1204 Notes Maximum supported number of AH402A/AH403A adapters is limited by the number of available PCIe slots in any listed system.
PAGE 9
Adapter AD355A 18 PCIe Dual Port 4 Gb Fibre Channel HBA AD299A 18 PCIe Single Port 4 Gb Fibre Channel HBA AB378B PCI-X 2.0 Single Channel 4 Gb Fibre Channel HBA AB379B PCI-X 2.0 Dual Channel 4 Gb Fibre Channel HBA Hardware platform Minimum system firmware requirements sx2000 Integrity Superdome PCIe + PCI-X Hybrid5 Any SFW FW 2.82X4 EFI 4.01a5 Yes rx8640 PCIe + PCI-X Hybrid Any SFW FW 2.82X4 EFI 4.01a5 Yes rx7640 PCIe + PCI-X Hybrid Any SFW FW 2.82X4 EFI 4.
PAGE 10
Adapter AD193A PCI-X Combo 1-port 4 Gb FC and 1-port 1000Base-T (copper) Adapter6 AD194A PCI-X Combo 2-port 4 Gb FC and 2-port 1000Base-T (copper) Adapter6 Hardware platform Minimum system firmware requirements HP 9000 Superdome sx2000 + IOX5 Any PDC FW 4.00.90 Yes HP 9000 Superdome sx1000 + IOX5 PDC 23.1 FW 4.00.90 Yes rp8440 + IOX Any PDC FW 4.00.90 Yes rp8420 + IOX PDC 23.1 FW 4.00.90 Yes rp7440 Any PDC FW 4.00.
PAGE 11
Adapter AD300A PCIe 4 Gb Fibre Channel HBA AB379A PCI-X 2.0 4 Gb Fibre Channel HBA Hardware platform Minimum system firmware requirements sx2000 Integrity Superdome PCIe + PCI-X Hybrid5 Any SFW FW 5.03.15 EFI 2.22 Yes rx8640 PCIe + PCI-X Hybrid Any SFW FW 5.03.15 EFI 2.22 Yes rx7640 PCIe + PCI-X Hybrid Any SFW FW 5.03.15 EFI 2.22 Yes rx6600 PCIe + PCI-X Hybrid Any SFW FW 5.03.15 EFI 2.22 Yes Yes rx3600 PCIe + PCI-X Hybrid Any SFW FW 5.03.15 EFI 2.
PAGE 12
Adapter A9782A PCI-X Combo 1-port 2 Gb FC and 1-port 1000Base-T (copper) Adapter6 Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support rp8400 + IOX PDC 17.008 FW 3.03.154 Yes Yes rp7440 Any PDC FW 3.03.154 Yes Yes PDC 20.008 FW 3.03.154 Yes Yes rp7420 10 rp7410 10 PDC 17.008 FW 3.03.154 Yes Yes rp4440 PDC 44.06 FW 3.03.154 Yes Yes rp34x0 PDC 44.06 FW 3.03.
PAGE 13
Adapter Hardware platform Minimum system firmware requirements Recommended adapter firmware Boot support Operating system 18 Driver bundle OL* support Notes Notes 1 Refer to Virtual Connect documentation for recommended versions of VC, OA, and other components. Boot is supported through all 6 mezzanine ports (each blade can have a maximum of 3 mezzanine boards; each board has 2 ports), as well as through the Virtual Connect module.