HP X.25/9000 Release Notes Version B.11.11.00 Manufacturing Part Number: J2793-90047 E0503 U.S.A. © Copyright 1983-2003 Hewlett-Packard Company. All rights reserved.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty.
©copyright 1990, 1991, 1992 Cornell University ©copyright 1989-1991 The University of Maryland ©copyright 1988 Carnegie Mellon University ©copyright 1991-2000 Mentat Inc. ©copyright 1996 Morning Star Technologies, Inc. ©copyright 1996 Progressive Systems, Inc. ©copyright 1991-2000 Isogon Corporation, All Rights Reserved. Trademark Notices. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.
HP X.25/9000 J2793B Release Note for B.11.11.00 Announcement 1 HP X.25/9000 J2793B Release Note for B.11.11.00 This release note includes B.11.11.00 version of J2793B. Announcement This version includes: • Support for LLC2 implementation which allows X.25 to run over LAN. • Support for OLAR feature which allows on-line addition/replacement of PCI I/O cards.
HP X.25/9000 J2793B Release Note for B.11.11.00 What’s in This Version What’s in This Version This version includes: • Support for the LLC2 specification that allows X.25 layer 3 to connect to DLPI instead of LAP-B. With this X.25 can now work with LAN cards (100BT, FDDI, TR). • Support for on-line addition/replacement of the J3525A and J3526A PCI I/O cards. • Replacement card for J3525-69001 on rx5670 systems.
HP X.25/9000 J2793B Release Note for B.11.11.00 What’s in This Version Manuals Available for this Version The following English manuals are available for this release. These manuals have been updated for this release. • X.25/9000 User’s Guide (J2793-90046) • X.25/9000 Programmer’s Guide (J2793-90048) The following manuals are localized in the Japanese language: • X.25/9000 User’s Guide (B1053-90001) • X.
HP X.25/9000 J2793B Release Note for B.11.11.00 Known Problems and Workarounds Known Problems and Workarounds This section describes known problems and workarounds for version B.11.11.00 of the J2793B X.25 product. • Coexistence between the X.25 PSI cards and the ACC (Advanced Communication Controller) cards on the same system is not supported. You can use PSI cards supported by the J2793B product or ACC cards supported by the Z7476AA product, but do not install both cards on the same system. If the X.
HP X.25/9000 J2793B Release Note for B.11.11.00 Known Problems and Workarounds Table 1-1 Recommended Window Sizes (Continued) Level 3 Packet Size Level 2 Window Size 32 1 - 127 16 1 - 127 • nettl sequence numbering in traces may be incorrect with modulo-128. Workaround. You may disregard the sequence numbering information, or use strace to see Level 3 packet sequence numbers.
HP X.25/9000 J2793B Release Note for B.11.11.00 Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements The following section lists the hardware and software requirements for the J2793B X.25 product. Installation Requirements Version B.11.11.00 of J2793B requires the HP-UX 11i software to be installed and correctly configured. To use the OLAR feature, your system must be running HP-UX 11i.
HP X.25/9000 J2793B Release Note for B.11.11.00 Compatibility Information and Installation Requirements Table 1-3 Adapters Supported Interfaces RS-232 V.35/V.36 X.21 RS-449 RS-530 J2792A 64 Kbps 64 Kbps 256 Kbps 256 Kbps NA J2794A 64 Kbps 64 Kbps NA 1.5 Mbps NA J2815A 64 Kbps NA 256 Kbps NA NA J3525A 64 Kbps 64 Kbps 2 Mbps 2 Mbps 2 Mbps J3526A 64 Kbps 64 Kbps 2 Mbps 2 Mbps 2 Mbps Upgrading Upgrading from HP-UX 10.20 to HP-UX 11i or from HP-UX 11.
HP X.25/9000 J2793B Release Note for B.11.11.00 Patches and Fixes in This Version Patches and Fixes in This Version The following fixes are included in this version. The fixes that went into the version 11.00.07 of the product are applicable for this version too. Table 1-5 SR Number Fixes Known Problem 8606-106179 x25stop hang when connected to a switch with a non-standard behavior 8606-136029 Downloading the firmware to HP-PB PSI card hangs. 8606-152642 x25streams: IP over X.
HP X.25/9000 J2793B Release Note for B.11.11.00 Software Availability in Native Languages Software Availability in Native Languages This version of the J2793B software is available only in English. Also, the documentation for version B.11.11.00 of the J2793B X.25 software is available only in English. However, Appendix A of the X.25/9000 User's Guide provides instructions for using French, Italian and German Subscription forms when configuring the X.25 software.