HP X.25/9000 Release Notes

HP X.25/9000 J2793B Release Note for B.11.11.00
Compatibility Information and Installation Requirements
Chapter 110
Compatibility Information and Installation Requirements
The following section lists the hardware and software requirements for the J2793B X.25
product.
Installation Requirements
Version B.11.11.00 of J2793B requires the HP-UX 11i software to be installed and correctly
configured.
To use the OLAR feature, your system must be running HP-UX 11i.
The High Availability feature requires that the HP MC/ServiceGuard product (B3935BA) is
installed and that the X.25 software uses switches that support the Hunt Group Facility
which allows multiple DTEs to share a common X.121 address.
NOTE HP MC/ServiceGuard product works on servers only.
Refer to the X.25/9000 User’s Guide for instructions on configuring the High Availability
features of the X.25 software.
Hardware Requirements
The following table shows a list of supported hardware adapters.
Table 1-2 Supported Adapters
Supported
Adapters
Number of
Ports
Bus Type
HP-UX 11i
OS
J2792A 1 HP-PB 32- or 64-bit
J2794A 1 EISA 32-bit
J2815A 2 EISA 32-bit
J3525A 2 PCI 32- or 64-bit
J3526A 4 PCI 32- or 64-bit