HyperFabric Administrator's Guide (HP-UX 11i v2, includes Transparent Local Failover for HMP)

Troubleshooting HyperFabric
Useful Files
Chapter 6 141
Useful Files
When you are troubleshooting HyperFabric-related problems, you might
find it useful to look at the contents of the following files:
• /etc/rc.config.d/clic_global_conf
This is the global configuration file. Check it to confirm that the
configuration information is correct.
• /var/adm/clic_log
This is a global log file that contains a history of significant
HyperFabric events. For example, it contains a history of the fabric’s
startup and any errors that occurred during it.
• /var/adm/clic_log.old
This is the backup copy of the log file that is created when the log file
grows larger than 100 Kbytes
• /var/adm/OLDclic_log
This is the log file from the previous time the clic_start command
was executed.
• /var/adm/syslog.log
This is the system log file, which contains a history of events
occurring on the HP 9000 system.
• /var/adm/clic_ip_drv.trc
This is one of the HyperFabric software’s trace files, and it is created
by the clic_diag -D TCP_IP command.
• /var/adm/clic_ip_drv.trc0
This is one of the HyperFabric software’s trace files, and it is the
primary file created by the clic_diag -C TCP_IP command.
• /var/adm/clic_ip_drv.trc1
This is one of the HyperFabric software’s trace files, and it is created
by the clic_diag -C TCP_IP command when the primary trace file
(clic_ip_drv.trc0) becomes full.