SerialSCSI-00 (sasd) B.11.23.
© Copyright 2008 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the December 2008 release of the SerialSCSI-00 bundle for HP-UX 11i v2. 1 SerialSCSI-00 (sasd) Overview The SerialSCSI-00 bundle contains the sasd driver for the AH303A PCIe SC44Ge SAS Host Bus Adapter, and the core-only HP 8 Internal Port SAS Controller and HP Multi Port Internal SAS Controller. The sasd driver is always installed. 1.
Known Problems and Limitations This section provides a list of problems and limitations known to HP when these release notes were published. If workarounds are available, they are included. 4.1 HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller • Updating the adapter firmware to version 1.23.33 or later might change the target ID of disk devices.
Corrective Action: This issue is corrected in vPars A.04.06 (B.11.23.0809). • setboot command issue on specific servers. The setboot -p/-a/-h command fails when issued on an AH303A adapter installed in slots 3 or 4 on HP Integrity rx3600 and rx6600 systems. Corrective Action: Install AH303A adapters in nonswitched slots. This issue is corrected in patch PHKL_37869. You can download patches from the IT Resource Center at: http://itrc.hp.com/ 4.
This version of SerialSCSI-00 requires Fusion 0806 or later of Ignite-UX. You can download these products from the Software Depot website at: http://www.hp.com/go/softwaredepot Search for CommonIO and Ignite-UX. 5.2 Operating System and Version Compatibility This release is specific for HP-UX 11i v2 (B.11.23). 5.3 Hardware Requirements This version of SerialSCSI-00 runs on HP Integrity servers with the HP-UX 11i v1 (B.11.23) operating system.