SerialSCSI-00 (sasd) B.11.23.
© Copyright 2009 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the March 2009 release of the SerialSCSI-00 bundle for HP-UX 11i v2. 1 SerialSCSI-00 (sasd) Overview The SerialSCSI-00 bundle contains the sasd driver for the AH303A PCIe SC44Ge SAS Host Bus Adapter, and the core-only HP 8 Internal Port SAS Controller and HP Multi Port Internal SAS Controller. The sasd driver is always installed. 1.
Table 4 HP-UX 11i v2 September 2008 Fixes — SerialSCSI-00 B.11.23.0809 SR Number QXCR1000766541 Description System panic when Scatter/Gather elements exceed the limit. 4 Known Problems and Limitations This section provides a list of problems and limitations known to HP when these release notes were published. If workarounds are available, they are included. 4.1 HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller • Updating the adapter firmware to version 1.23.
Corrective Action: This issue is corrected in vPars A.04.06 (B.11.23.0809). • Virtual Partitions do not boot if hardware reconfiguration changes the hardware path under vPars A.4.05. Virtual Partitions (vPars) using an HP StorageWorks MSA50/MSA60/MSA70 enclosure do not boot if hardware paths change due to hardware reconfiguration. For more information on the impacts of hardware reconfiguration, see the Ignite-UX and SAS Devices white paper at: http://docs.hp.com/en/oshpux11i.
Internal SAS Controller Support Guide or the AH303A PCIe SC44Ge SAS Host Bus Adapter for Integrity Servers Support Guide, at: http://docs.hp.com/en/netcom.html 5.1 Required Software The SerialSCSI-00 bundle depends on SAS-COMMON, which is delivered as a part of the CommonIO bundle. Before installing SerialSCSI-00, be sure that version B.11.23.0803 or later of CommonIO is installed. This version of SerialSCSI-00 requires Fusion 0806 or later of Ignite-UX.