HP-UX 11i v3 Installation and Update Guide, September 2009 (Update 5 Release)

1. If the installation detects that you have a PS2 or USB keyboard, the system displays
the Language Mapping screen. Select the number of the language you want to
use (such as 26 for US English) and then press Enter to confirm your choice.
2. From the Ignite-UX Welcome screen, select Install HP-UX to begin interacting
with the Ignite-UX (cold-install) program and then press Enter. The system displays
the User Interface and Media Options window.
3. From the User Interface and Media Options window, choose the degree of
customizing needed to configure the installation. Mark your choices and select
OK.
a. Select from one of the three choices shown in Source Location Options:
• Media only installation is the default setting for installing from a DVD.
(This document only provides the procedures for cold-installing from
media.)
• Media with network enabled is recommended when you want basic
networking enabled during installation so you can load software from a
network depot (when an Ignite-UX server is not available).
• Ignite-UX server based installation is recommended if you have an
Ignite-UX server configured on your network and you want to supply
custom configurations during the installation.
b. Select from one of the choices shown in User Interface Options:
• Advanced Installation enables you to accept all the default installation
parameters or fully customize your system such as configuring multiple
disks and adjusting file system sizes. HP recommends choosing the
Advanced Installation option to configure your installation.
• No User Interface is recommended if you want to accept all the default
installation parameters and you do not need to verify the configuration
using the user interface.
The remaining sections take you through the Media only installation option and
the Advanced Installation option. For more help on using the Advanced
Installation screens, refer to the Ignite-UX Administration Guide (http://docs.hp.com/
en/oshpux11iv3.html#Ignite-UX).
Configuring your installation
At this point, the system displays the Basic tab of the Ignite-UX itool Terminal User
Interface (TUI) for the HP-UX Advanced Installation process. The Basic tab shows all
the basic information for setting up the file system and for loading the Operating
Environment. It also allows you to configure languages, locale, and keyboard
requirements.
1. In the Configurations field, select an overall system configuration that you want
to use for this installation.
50 Cold-installing HP-UX 11i v3 from local media