Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the L-Class and N-Class Servers
Appendix A116
Step 3. Enter the IN PR command to display the processor information:
Main Menu: Enter command or menu > IN PR
Model: 9000/800/L2000-44
PROCESSOR INFORMATION
HVERSION SVERSION Processor
Processor Speed Model Model/Op CVERSION State
--------- -------- -------- -------- -------- -------------
0 440 MHz 0x05c4 0x0491 2. 0 Active
3 440 MHz 0x05c4 0x0491 2. 0 Stopped:Deconfigured
Central Bus Speed (in MHz) : 82
Software ID (dec) : 0
Software ID (hex) : 0x00000000
Software Capability : 0x01100000f0
Main Menu: Enter command or menu >
---- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DeBug menu Displays debug commands
MFG menu Displays manufacturing commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu >
In the above example two processors are on the system. Processor 0 is
configured and processor 3 is deconfigured.