Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the L-Class and N-Class Servers
Appendix A 117
Step 4. Enter the CO command to enter the configuration menu:
Main Menu: Enter command or menu > CO
---- Configuration Menu ------------------------------------------------------
Command Description
------- -----------
AUto [BOot|SEArch|STart] [ON|OFF] Display or set specified flag
BootID [<proc>] [<bootid>] Display or set Boot Identifier
BootINfo Display boot-related information
BootTimer [0 - 200] Seconds allowed for boot attempt
CPUconfig [<proc>] [ON|OFF] Config/Deconfig processor
DEfault Set the system to predefined values
FAn [HI|NORmal] Display or change fan speed
FastBoot [ON|OFF] Display or set boot tests execution
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TIme [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Configuration Menu: Enter command >
Step 5. Use the CPU <processor number> ON command to configure the
processor. Repeat this step until all processors that are targeted for
activation are configured:
Configuration Menu: Enter command > CPU 3 ON
Changes will not take effect until next hard boot
PROCESSOR CONFIGURATION INFORMATION
Processor hpa Configuration Status
--------- ------------------ ----------------------------------------
3 0xfffffffffffa6000 Deconfigured, flagged to be reconfigured
Configuration Menu: Enter command >