Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the L-Class and N-Class Servers
Appendix A118
Step 6. Use the CPU command to display processor information and verify that
the processors that are targeted for activation are flagged to be
configured:
Configuration Menu: Enter command > CPU
PROCESSOR CONFIGURATION INFORMATION
Processor hpa Configuration Status
--------- ------------------ ----------------------------------------
0 0xfffffffffffa0000 Configured, not flagged to be deconfigured
3 0xfffffffffffa6000 Deconfigured, flagged to be reconfigured
Configuration Menu: Enter command >
Step 7. Reset the system to configure the processors. Enter the command RESET
and boot the system to the HP-UX prompt:
Configuration Menu: Enter command > RESET
Step 8. At the system prompt, activate the configured processors with the
icod_modify command (see “Increasing Processor Capacity” on
page 58).