10GigEthr-02 (iexgbe) B.11.31.1004 Ethernet Driver Release Notes, Edition 2 (June 2010)

• Installation guides are listed alphabetically in the “Setup and install — general” section.
• Support Matrix documents are listed alphabetically in the “General reference” section.
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware requirements
This version of 10GigEthr-02 runs on HP Integrity BL860c (rev B), BL870c, and BL8x0c i2 server
blades with the HP-UX 11i v3 (B.11.31) operating system. This configuration has specific version
requirements for many system components:
Table 1 System component minimum version requirements
Minimum version requiredSystem component
BHP Integrity BL860c hardware revision
4.21HP Integrity BL860c system firmware
4.21HP Integrity BL870c system firmware
Use the latest system firmware. For
information on how to obtain and install
system firmware, see the server
documentation.
HP Integrity BL8x0c i2 system firmware
3.0HP Onboard Administrator firmware
3.0HP Virtual Connect firmware
5.0.27467799-B21 HP BL-c NC532m NIC Adapter Opt Kit EFI driver
Use the latest version available. For
information on how to obtain and install
interconnect module firmware, see the
product's documentation.
Interconnect module firmware
6 Related information
The latest documentation for Ethernet cards is available in English at:
http://www.hp.com/go/hpux-iocards-docs
Click the link for your HP-UX version.
• Installation guides are listed alphabetically in the “Setup and install — general” section.
• Release notes are listed alphabetically in the “Getting started” section.
• Support guides are listed alphabetically in the “User guide” section.
• Support Matrix documents are listed alphabetically in the “General reference” section.
7 Software availability in native languages
The 10GigEthr-02 product is available only in the English language.
6 Related information 5