0GigEthr-02 (iexgbe) B.11.31.1009.
© Copyright 2010 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the September 2010 web release of the 10GigEthr-02 bundle for HP-UX 11i v3.
3 Problems fixed in this version Table 1 HP-UX 11i v3 September 2010 Fixes — 10GigEthr-02 B.11.31.1009.01 SR number QXCR1001053175 Description Registered Multi-Cast addresses are lost when a device is reset or the receive mode is toggled (such as by turning promiscuous mode on and off). Problems fixed in recent versions There were no defects or fixes included in 10GigEthr-02 version B.11.31.1009. There were no defects or fixes included in 10GigEthr-02 version B.11.31.1004.
.2 Hardware requirements This version of 10GigEthr-02 runs on HP Integrity servers with the HP-UX 11i v3 (B.11.31) operating system. This configuration has specific version requirements for many system components: Table 2 System component minimum version requirements System component Minimum version required HP Integrity BL860c hardware revision B HP Integrity BL860c system firmware 4.21 HP Integrity BL870c system firmware 4.
