0GigEthr-02 (iexgbe) B.11.31.
© Copyright 2010 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the November 2010 web release of the 10GigEthr-02 bundle for HP-UX 11i v3.
2.2 Changed features The following features are changed with this version of 10GigEthr-02: • Updates for AM225A This driver version includes important updates for SFP modules included with the HP AM225A 10GbE-SR (fabric) adapter. The AM225A adapter requires iexgbe driver version B.11.31.1011 or later. 3 Problems fixed in this version Table 1 HP-UX 11i v3 November 2010 Fixes — 10GigEthr-02 B.11.31.
Compatibility and installation requirements This section describes the compatibility information and installation requirements for this release. • For specific installation instructions, see the installation procedure or overview document for your card. • For detailed information on supported server platforms, operating systems, and firmware level requirements, see the Ethernet Support Matrix. These documents are available at: http://www.hp.com/go/hpux-iocards-docs 5.
