0GigEthr-02 (iexgbe) B.11.31.
© Copyright 2011 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the March 2011 web release of the 10GigEthr-02 bundle for HP-UX 11i v3.
3 Problems fixed in this version Table 1 HP-UX 11i v3 March 2011 Fixes — 10GigEthr-02 B.11.31.1103 SR number QXCR1001091276 Description “ERROR: Could not process request” when changing driver default settings. Problems fixed in recent versions Table 2 HP-UX 11i v3 November 2010 Fixes — 10GigEthr-02 B.11.31.1011 SR number QXCR1001076951 Description Link hardware initialization failure if reset is done on both NIC ports. Table 3 HP-UX 11i v3 September 2010 Fixes — 10GigEthr-02 B.11.31.1009.
Compatibility and installation requirements This section describes the compatibility information and installation requirements for this release. • For specific installation instructions, see the installation procedure or overview document for your card. • For detailed information on supported server platforms, operating systems, and firmware level requirements, see the Ethernet Support Matrix. These documents are available at: http://www.hp.com/go/10-gigabit-ethernet-docs 5.
