10GigEthr-02 (iexgbe) B.11.31.1203 Ethernet Driver Release Notes

4 Known problems and limitations
The following problems are known to exist in version B.11.31.1203:
• Using ncweb to change number of receive queues causes an error message.
Severity: Medium
When you use the ncweb or SMH interface to change the number of receive queues, an error
message appears.
Workaround: Use nwmgr instead of ncweb to change number of the queues. The command
syntax is:
nwmgr -s -A drv_mq=<new#> -c lan<instance>
where
<new#> The number of queues that you want to enable.
<instance> Instance number of the LAN interface; for example, lan1.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
• For specific installation instructions, see the installation procedure or overview document for
your card.
• For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/10-gigabit-ethernet-docs
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware requirements
This version of 10GigEthr-02 runs on HP Integrity servers with the HP-UX 11i v3 (B.11.31) operating
system. This configuration has specific version requirements for many system components:
Table 4 System component minimum version requirements
Minimum version requiredSystem component
BHP Integrity BL860c hardware revision
4.21HP Integrity BL860c system firmware
4.21HP Integrity BL870c system firmware
Use the latest system firmware. For
information on how to obtain and install
HP Integrity BL8x0c i2 system firmware
HP Integrity Superdome 2 system firmware
system firmware, see the server
documentation.
3.0HP Onboard Administrator firmware
5.2.27NC532m, AM225A, AM232A, AM233A EFI driver
Use the latest version available. For
information on how to obtain and install
HP Virtual Connect firmware
Interconnect module firmware
interconnect module firmware, see the
product's documentation.
4 Known problems and limitations 5