HP CommonIO B.11.31.1203 Release Notes HP-UX 11i v3 Abstract This document provides information about the March 2012 release of the CommonIO bundle for HP-UX 11i v3.
© Copyright 2012 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
1 HP CommonIO Overview The CommonIO bundle packages multiple products, and is always installed. The following sections describe each CommonIO component. 1.1 FC-COMMON FC-COMMON is delivered in the CommonIO bundle. FC-COMMON contains the FC-SNIA file set. FC-SNIA contains the Common SNIA HBA Application Programming Interface (API) library, which provides a consistent interface to access HBA information in a Fibre Channel Storage Area Network.
3 Problems fixed in this version 3.1 FC-COMMON Table 2 HP-UX 11i v3 March 2012 fixes — CommonIO B.11.31.1203 SR number Description QXCR1001135382 The HPUXFCProviderModule loads libhbaapigvsd.so when no GVSD device is present. QXCR1001162593 1203BALL4SP2:snia_demo cannot detect VMSAN adapters. Problems fixed in recent versions Table 3 HP-UX 11i v3 September 2011 Fixes — CommonIO B.11.31.1109 SR number Description QXCR1001117037 CommonIO is enhanced to support the New SNIA library for FCQ driver.
Bus Adapter Support Matrix at http://www.hp.com/go/fibre-channel-HBA-docs and the SAS Host Bus Adapters Support Matrix at http://www.hp.com/go/sas-hba-docs. 6 Related information You can download documentation for Fibre Channel and SAS host bus adapters in English at: • http://www.hp.com/go/fibre-channel-HBA-docs • http://www.hp.com/go/sas-hba-docs Documents are organized as follows: • Installation guides are listed alphabetically in the “Setup and install - general” section.
