HP PCIe 2 port 10Gb Ethernet-SR, LR, and CR Adapter Installation Guide, Edition 2

Table 2 Environmental Specifications (continued)
MaximumMinimumEnvironment
90% RH at 65° C (149° F) for 24 hours (non-condensing)Non-operating/Storage humidity
Random operating: ~0.21 Grms (5–500 Hz)Vibration
Swept sine: 0.5 Grms (5–500 Hz) 5 min. dwell at 4 resonance
Random survival: ~2.09 Grms (5–500Hz)
0 to 3,000 m (0 to ~10,000 ft)Operating altitude
0 to 4,600 m (0 to ~15,000 ft)Non-operating altitude
Physical Specifications
Table 3 lists the physical specifications.
Table 3 Physical Specifications
DescriptionParameter
PCIe Low Profile Adapter with Full Height bracket (default) and Low Profile bracket (available)Form factor
68.90 mm (2.731 in)Height
167.65 mm (6.6 in)Length
1.57 mm ± 0.20 mm (0.062 in ± 0.008 in)Thickness
System Interface and Support
• PCI Express x8 lane operation
• PCI Express Gen 2
• Supported on HP Integrity Servers with PCIe slots
(HP Integrity rack servers, future servers)
Operating System Support
• HP-UX
◦ 11i v3
• Open VMS (not available at first release)
• Windows
Windows Server 2008 SP2◦
◦ Windows 2008 R2
◦ Windows 7
Ethernet Technology
The Ethernet technology designed into the HP PCIe 2 Port 10GbE adapter(s) includes the following:
• Broadcom BCM57711E Ethernet controller
• Broadcom BCM8726 XAUI to SFP+ Physical Layer (PHY)
• LED indicators
• Supports 2 SFP+ Serial 10Gb Interface
4 HBA specifications