HP-UX and Windows OS Installation Guide for HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter

Installing driver software
NOTE: Use the following instructions if the driver is provided on a CD-ROM. If the driver
software is downloaded, follow the instructions provided with that file.
The initial release of the 10GigEthr-02 bundle is available by restricted download only; please
contact your account manager or HP-UX Ambassador for instructions on how to obtain this
bundle.
Future releases of the HP-UX v3 Operating Environment media or Application Release media
will include the bundle, and the bundle will also be made available for unrestricted download
on the Software Depot website.
Install all driver software and dependency patches before you install the adapter. See the
10GigEthr-02 (iexgbe) Ethernet Driver for HP-UX Release Notes available at:
http://www.hp.com/go/hpux–11iv3–iocards–manuals for details.
Use the following procedure to load the driver from a CD-ROM:
1. Log in to the system as root.
2. Insert the CD into the CD drive.
3. Mount the CD using the following command:
mount /dev/dsk/<cd_rom_dev_file> /<tmp_mnt>
4. Run swinstall to install the software. Enter the following command:
/usr/sbin/swinstall
The Software Selection window and the Specify Source window open.
5. In the Specify Source window, change the Source Host Name if necessary. Enter the
mount point of the drive in the Source Depot Path field and click OK to return to the
Software Selection Window.
Click Help to get more information.
6. Select the appropriate software bundle for your adapter.
7. Select Mark for Install from the Actions menu.
8. Select Install from the Actions menu. Installation begins and the Install Analysis window
opens.
9. Click OK in the Install Analysis window to confirm that you want to install the software.
The Install window opens.
View the Install window to read processing data while the software installs. When the
Status field indicates Ready, the Confirmation window opens.
10. Click OK. A second Confirmation window opens.
11. Click OK again. The Install window opens.
12. Click Done. The Note window opens.
13. Click OK in the Note window to reboot. The user interface disappears and the system reboots.
14. Once the system returns to a login, log in as root and open the following files to see any
error or warning messages that may have occurred during the installation:
/var/adm/sw/swagent.log
/var/adm/sw/swinstall.log
15. Install OnlineDiag, which is available at the Software Depot website:
http://h20392.www2.hp.com/portal/swdepot/index.do
OnlineDiag is also available from the HP Support PLUS CD.
6 Installing the HP-UX operating system components