Migrating X.25 over PSI to X.25 over TCP/IP (XOT)

Figure 4 Network configuration with X.25 over TCP/IP
Configuration Migration
The XOT functionality on HP-UX 11iv3 is delivered along with the September 2011 (AR1109)
release of X.25 product.
To configure XOT functionality, the following configuration files must be edited or manually added.
• Generic X.25 configuration file, x25init_xot_def
• XOT specific configuration file, x121_to_ip_map
NOTE: When providing the configuration files as arguments to the x25init command, they must
always be specified along with the absolute pathname. For example /etc/x25/x25init_xot_def.
Generic X.25 Configuration File
The generic X.25 configuration file is used with a few additional XOT specific parameters to
configure XOT.
Table 2 lists the specific parameters for XOT that must be defined while configuring an XOT
interface.
14 Migrating X.25 over PSI to XOT