Migrating X.25 over PSI to X.25 over TCP/IP (XOT)

Example 2 Sample XOT specific configuration file
# X.25 to IP Map File
# SVC Routing Information, as per RFC 1613
#
#Destination X.21 Destination
# Address IP Address
55555 10.0.0.3
11111 10.0.0.4
#
# PVC Routing Information as per RFC 1613
# Local(LCN),Remote(LCN),LocalInterfacename,RemoteInterfacename,Remoteip
pvcroute 1 4 xot0 xot0 10.0.0.3 #PVC channel 1 mapped to channel 4
pvcroute 2 3 xot0 xot0 10.0.0.4 #PVC channel 2 mapped to channel 3
pvcroute 3 2 xot0 xot0 10.0.0.4 #PVC channel 3 mapped to channel 2
pvcroute 4 1 xot0 xot0 10.0.0.3 #PVC channel 4 mapped to channel 1
Scenario # 1: Migrating a SVC over X.25/LAPB (PSI) to a SVC over XOT
Figure 5 : Initial X.25 Topology: Two hosts are connected across a X.25 switch through X.25/LAPB
Protocol using SVC
Configuration Migration 17