HP Integrity Virtual Machines Installation, Configuration, and Administration Version A.03.50

11. Obtain the guest's IP address by entering the i command to the SAC> prompt.
Use the Remote Desktop Connection from a PC to connect to that IP address and log in as
Administrator. The Support Pack completes installation:
Computer is booting, SAC started and initialized.
Use the "ch -?" command for information about using channels.
Use the "?" command for general help.
SAC>...
EVENT: The CMD command is now available.
SAC>i
Net: 2, Ip=1.2.3.4 Subnet=255.255.248.0 Gateway=16.116.0.1
SAC>
NOTE: If the system displays System model could not be verified, simply
acknowledge the dialog. When asked to confirm, select No and then reboot the virtual
machine.
12. From the Windows control panel, follow the initial system setup instructions from the
platform user's guide. For example:
a. Control-Panel->System (Set Computer name)
b. Control-Panel->System->Advanced->Virtual Memory
13. Reboot the virtual machine.
5.2.2 Installing from Windows Media
To install the Windows Enterprise operating system from Windows media, follow these steps:
1. Allocate a virtual DVD to the virtual machine, as described in Chapter 3 (page 31).
2. Boot the virtual machine to the EFI menu and take control of the virtual console by entering
the following command:
# hpvmconsole -P win1 -i -c "pc -on"
vMP MAIN MENU
CO: Console
CM: Command Menu
CL: Console Log
SL: Show Event Logs
VM: Virtual Machine Menu
HE: Main Help Menu
X: Exit Connection
[compass1] vMP> pc -on
Please wait for the guest start sequence to complete. Use of the attention
character can prevent the guest from running.
(C) Copyright 2000 - 2007 Hewlett-Packard Development Company, L.P.
Opening minor device and creating guest machine container
Creation of VM, minor device 1
Allocating guest memory: 2048MB
allocating low RAM (0-80000000, 2048MB)
/opt/hpvm/lbin/hpvmapp (/var/opt/hpvm/uuids/682da886-06b2-11db-a3aa-00306e4a931c
/vmm_config.current):
Allocated 2147483648 bytes at 0x6000000100000000
allocating firmware RAM (ffaa0000-ffab5000, 84KB)
/opt/hpvm/lbin/hpvmapp (/var/opt/hpvm/uuids/682da886-06b2-11db-a3aa-00306e4a931c
/vmm_config.current):
Allocated 86016 bytes at 0x6000000180000000
Loading boot image
Image initial IP=102000 GP=62A000
Initialize guest memory mapping tables
Starting event polling thread
Starting thread initialization
Daemonizing....
hpvmstart: Successful start initiation of guest 'win1'
60 Creating Windows Guests