HP-UX vPars and Integrity VM V6.3 Administrator Guide

Example 34 Configuration
An SD2 system configured as VSP running vPars and Integrity VM 6.3 with two active guests, and
the system has a Combo card supporting NIC (FLA) and FC functions.
# hpvmstatus
[Virtual Machines]
Virtual Machine Name VM # Type OS Type State #VCPUs #Devs #Nets Memory
==================== ==== ==== ======= ===== ====== ===== ===== =======
pvham1 2 VP HPUX On(OS) 3 2 23 22528 MB
pvoly2d 5 SH HPUX On(OS) 3 6 18 5 GB
The system has a Combo card supporting NIC (FLA) and FC, it is residing in an OL* capable slots
and its ports are configured to DIO pool.
# hpvmhwmgmt -p dio -l
Assignment
H/W Path Class Owner Description Level Label
====================== ===== ===== =================== ==============
43/0/2/2/0/0/0/8/0/0/0 lan hpvm HP AT094A 10GbE-SFP PCIe function
43/0/2/2/0/0/0/8/0/0/1 lan hpvm HP AT094A 10GbE-SFP PCIe function
The slot details of the FLA NIC are as follows:
# olrad -q
Slot Path Link Max Max Link Pwr Occu Susp OLAR OLD Mode
Spd Link Link Width
Spd Width
10-0-2-2-2-2 43/0/2/2/0/0 5.0 5.0 x8 x8 On Yes No Yes Yes PCIe
# ioscan -kfNH 43/0/2/2/0/0/0
Class I H/W Path Driver S/W State H/W Type Description
======= === ============== ======== ========== ========= =============================
ba 44 43/0/2/2/0/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ba 45 43/0/2/2/0/0/0/4/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ba 46 43/0/2/2/0/0/0/5/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
fc 6 43/0/2/2/0/0/0/5/0/0/0 fclp CLAIMED INTERFACE HP AT094-
60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
fc 11 43/0/2/2/0/0/0/5/0/0/0.0x11 fclp CLAIMED INTERFACE HPVM
Virtual FC (VFC) Controller
tgtpath 4 43/0/2/2/0/0/0/5/0/0/0.0x50001fe15000cd2a estp CLAIMED TGT_PATH
fibre_channel target served by fclp driver, target port id 0x31700
lunpath 24 43/0/2/2/0/0/0/5/0/0/0.0x50001fe15000cd2a.0x0 eslpt CLAIMED LUN_PATH
LUN path for ctl6
fc 7 43/0/2/2/0/0/0/5/0/0/1 fclp CLAIMED INTERFACE HP AT094-
60001 PCIe Fibre Channel 2-port 8Gb FC/2-port 10GBE Combo Adapter
ba 47 43/0/2/2/0/0/0/8/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI
Bridge
hpvmdio 2 43/0/2/2/0/0/0/8/0/0/0 hpvmdio CLAIMED INTERFACE HP
AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10Gbe Adapter
hpvmdio 4 43/0/2/2/0/0/0/8/0/0/1 hpvmdio CLAIMED INTERFACE HP
AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10Gbe Adapter
Both ports of the FLA NIC are assigned to two different active VM guest pvoly2d and phvam1.
# hpvmdevinfo -M | grep dio
pqsbuc03:pvham1:2:lan:dio:2;2;0x5EFA2C6F1FB5:hwpath:43/0/2/2/0/0/0/8/0/0/0:0/0/2/2/0 (lan11)
pqsbuc03:pvoly2d:5:lan:dio:2;4;0x26D0A2CFE07B:hwpath:43/0/2/2/0/0/0/8/0/0/1:0/2/4/0 (lan19)
In the VM guest pvoly2d, the DIO functions (ports) are seen as lan19 (path 0/2/4/0) and IP
address is configured for this port only.
# ioscan -kfnC lan
Class I H/W Path Driver S/W State H/W Type Description
===== == ========= ======= ========= ========= ===============================
lan 19 0/2/4/0 iocxgbe CLAIMED INTERFACE HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p
1/10Gbe Adapter
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
====== ==== ============ ============= ===== ===== ===== ===== ====
lan19 1500 15.0.0.0 15.213.156.42 4 0 4 0 0
11.4 Performing PCI OLR on a VSP 185