HP-UX vPars and Integrity VM V6.3 Administrator Guide

Use ^ and v to change option(s). Use Enter to select an option
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]onsole - - - - - - - - - - - -
Device mapping table
fs0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588)
fs1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588)
blk0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)
blk1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588)
blk2 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part2,SigBEC59C52-E6C8-11DB-8003-D6217B60E588)
blk3 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588)
startup.nsh> echo -off
setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Changing the policy to enumerate all AVIO storage devices might result in longer guest boot times
(to the EFI level), depending on the guest's configuration.
If you must boot from a tape device attached to an NPIV (such as performing tape-based Ignite-UX
recovery), change the enumeration policy to "Enumerate all FC LUNs". As mentioned previously,
enumerating all FC LUNs can result in a long guest boot time. To minimize this delay, you can
temporarily reduce the number of NPIV HBAs for the VM to only the one containing the tape boot
device.
254 Managing vPars and VMs using CLI