Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars
Planning Your Virtual Partitions
Chapter 4 75
autoboot attribute to MANUAL using the vparmodify command. For
example, after installation is complete, to set the autoboot attribute to
MANUAL for the partition winona3:
# vparmodify -p winona3 -B manual
Virtual Partition Plan
Combining all parts above, the resultant partition plan is the following:
Partition
Name
winona1 winona2 winona3
CPUs
total = 2
min = 2
total = 2
min = 2
paths = 41,45
total = 1
min = 1
Unbound
CPUs
three CPUs are available
Memory
640 MB 1280 MB 1280 MB
I/0 Paths
(LBAs)
0/0
0/4
0/8
1/10
0/5
1/4
Boot Path
0/0/2/0.6.0 0/8/0/0.5.0 1/4/0/0.5.0
LAN
0/0/0/0 1/10/0/0/4/0 0/5/0/0/4/0
console port
owned by winona1
Autoboot
AUTO AUTO AUTO