Installing and Managing HP-UX Virtual Partitions (includes A.04.02)

CPU, Memory, and IO Resources (A.03.xx)
Removing a Bound CPU
Chapter 7
213
Removing a Bound CPU
To remove a bound CPU from a virtual partition, use the vparmodify command to modify the total and min
parameters for the virtual partition.
Example
• If the partition winona2 has two bound CPUs and you want only one bound CPU (and you do not want to
add any unbound CPUs), set the
total and min numbers to one:
winona1# vparmodify -p winona2 -m cpu:::1 -m cpu::1
NOTE: If you set only the
min number to one and leave the total number set at two, you will still have
two CPUs assigned to winona2. One bound CPU will be removed from the partition, but one unbound
CPU will be added to the partition in order to maintain the
total of two CPUs.
NOTE: Because one of the value requirements for CPUs is
min <= total and because command line
options are processed left to right, when setting both
min and total to one, you need to set min to one
before setting
total to one. This is accomplished by specifying the -m cpu::: min option before the -m
cpu::
total option.
Removing a CPU with a Specified Hardware Path
If you had specified a hardware path for a bound CPU, you would delete the specified hw_path and modify the
min and total numbers.
Example
• If you have two bound CPUs and want to remove the bound CPU at hardware path 41 (and do not want to
add any unbound CPUs), delete the hardware path 41, modify
min to one, and modify total number to
one:
# vparmodify -p winona2 -d cpu:41 -m cpu:::1 -m cpu::1
NOTE: If you delete only
hw_path and leave total as two and leave min as two, you will still have two
bound CPUs.
NOTE When executing any operations relating to bound CPUs (adding, modifying, or deleting), the
target virtual partition must be down.