HP Superdome 2 Partitioning Administrator Guide (5900-1801, August 2011)

The bo command without arguments prompts you to select a partition to boot:

bo This command controls power enable to a partition.

Partition Partition

Number Name

--------- ---------

1 nPar0001

1:1 nPar0001:vPar1

1:2 nPar0001:vPar0002

1:3 nPar0001:we

1:5 nPar0001:vPar0005

1:21 nPar0001:vPar0021

2 nPar0002

2:1 nPar0002:vPar0001

3 hard_partition

4 nPar0004

5 nPar0005

Q) Quit

Select partition number:2:1

Poweron request sent to partition 2:1.

Operation initiated successfully.

Please run PARSTATUS/VPARSTATUS or SHOW SYSLOG OA to determine the completion

status of the operation.

The pe command also prompts you to select a partition:

This command controls power enable to a partition.

Partition Partition

Number Name

--------- ---------

1 nPar0001

1:1 nPar0001:vPar1

1:2 nPar0001:vPar0002

1:3 nPar0001:we

1:5 nPar0001:vPar0005

1:21 nPar0001:vPar0021

2 nPar0002

2:1 nPar0002:vPar0001

3 hard_partition

4 nPar0004

5 nPar0005

Q) Quit

Select partition number: 2:1

The power state is OFF for partition 2:1.

In what state do you want the power? (ON/OFF) on

Booting from the GUI

You can go to the individual partition screens from the left navigation pane regardless of whether

the partition is an nPartition or a vPar.

1. Select a partition that you want to activate.

52 Booting and resetting Partitions (nPartitions and vPars)