HP-UX 11i v3 Installation and Update Guide, February 2007 (Initial Release)

Known Problems and Troubleshooting
Known Install and Update Problems
Appendix A 147
Updating to HP-UX 11i v3
from HP-UX 11iv2 with
VxFS 4.1
If you have created any VxFS file system with disk layout
version 2 or version 3, these file systems cannot be mounted
under VxFS 4.1 on HP-UX 11i v3.
What To Do
Use the vxfsconvert command to upgrade the disk layout to
version 4 before upgrading to VxFS 4.1 on HP-UX 11i Version3.
See the Veritas 4.1 Installation Guide for more information on
VxFS 4.1.
Third-Party Storage If third-party (non-HP) storage will be connected to your
HP-UX 11i v3 system, HP recommends that you contact
your third-party storage vendor to determine the
compatibility of the storage with HP-UX 11i v3. Check with
your third-party storage vendor for information about any
pre-requisites and limitations with the storage on HP-UX
11i v3.
Table A-1 Known Install and Update Problems (Continued)
Problem Description/Action