netmgr_iether.1m (2011 09)

nwmgr_iether(1M) nwmgr_iether(1M)

[ERANGE] The speciﬁed values of one or more attributes was less than the minimum or more than

the maximum.

EXAMPLES

List all LAN interfaces in the system:

nwmgr -C lan

Display the speed and MTU of the

iether interface lan1:

nwmgr -A speed,mtu -c lan1

Display all attributes of the iether interface lan1

nwmgr -A all -c lan1

Set MTU to 9000 and enable transmit CKO on

lan1

nwmgr -s -A mtu=9000,tx_cko=on -c lan1

Restore MTU and transmit CKO to their defaults on

lan1:

nwmgr --set -A mtu,tx_cko --from de -c lan1

Set asset tag as "AN34" in VPD on lan1

nwmgr -s -q asset_tag=AN34 -c lan1

Enable transmit buffer size limit to 512 bytes on lan1

nwmgr -s -A tx512_bufs=1 -c lan1

COMPARISON WITH LANADMIN COMMAND

Commands to Display Generic NIC Attributes

lanadmin nwmgr

lanadmin -m PPA nwmgr [-g] -A mtu -c lanPPA

lanadmin -a PPA nwmgr [-g] -A mac -c lanPPA

landamin -s PPA nwmgr [-g] -A speed -c lanPPA

lanadmin -m -a -s PPA nwmgr [-g] -A mtu,mac,speed -c lanPPA

nwmgr [-g] -A all -c lanPPA

Commands to Get NIC Statistics

lanadmin nwmgr

lanadmin -g PPA nwmgr -g --st mib -c lanPPA

lanadmin -x stats drv PPA nwmgr -g --st subsys -c lanPPA

nwmgr -g -st mib,subsys -c lanPPA

lanadmin -g mibstats_ext PPA nwmgr -g --st extmib -c lanPPA

8 Hewlett-Packard Company − 8 − HP-UX 11i Version 3: September 2011