scsimgr_estape.7 (2010 09)

s
scsimgr_estape(7) scsimgr_estape(7)
Default: 0
Values: 0 (disabled)
1 (enabled).
Note: This tunable was named
"st_ats_enabled" in releases prior to HP-
UX 11i v3.
Timeout for all commands not referenced
below.
Default: 60
LUN default_secs RW uint32
Timeout for the space command.
Default: 1200
space_secs RW uint32
Timeout for the write command.
Default: 600
write_secs RW uint32
Timeout for the read command.
Default: 1200
read_secs RW uint32
Timeout for the unload command.
Default: 600
unload_secs RW uint32
Timeout for the rewind command.
Default: 600
rewind_secs RW uint32
Timeout for the erase command.
Default: 18000
erase_secs RW uint32
The type of device a particular LUN is
associated with.
Default: 0
Values:
0 = unknown,
5 = HPIB 9-track
6 = DDS1
7 = All other DDS/DAT
8 = Scsi 9-track
9 = QIC
10 = 8mm
11 = IBM 3480, STK 9XXX, STK T10000
12 = Quantum DLT
13 = Sony AIT
14 = IBM 3590
15=LTO
mt_type RW uint32
default_blocksize Default blocksize.
Default: 0
0 = variable, overridden by a custom DSF.
RW uint32
Default immediate reporting.
Default: 1
Values: 0 (disabled)
1 (enabled)
default_ir RW uint32
Number of filemarks to indicate End of
Data.
Default: 2
close_marks RW uint32
num_partitions
_supp
Number of partitions supported
Default: 1
Range: 1+
RW uint32
Driver characteristics bitwise or’d together
Default: 0
1 = Device supports setmarks
2 = Logpage 31 contains capacity informa-
tion
4 = Logpage 38 contains capacity informa-
characteristics RW uint64
2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: September 2010