setboot.1m (2010 09)

s
setboot(1M) setboot(1M)
setboot -a /dev/disk/disk2 -b on
setboot displays:
Alternate boot path set to 0/0/0/3/0.0x6.0x0 (/dev/disk/disk2)
3. Display the boot paths, auto flags and hyperthreading:
setboot
on PA-RISC and Integrity system architecture displays:
Primary bootpath : 0/0/0/3/0.0x5.0x0 (/dev/rdisk/disk3)
HA Alternate bootpath : 0/0/0/3/0.0x6.0x0 (/dev/rdisk/disk2)
Alternate bootpath : 0/0/0/3/0.0x6.0x0 (/dev/rdisk/disk2)
Autoboot is ON (enabled)
Autosearch is ON (enabled)
on Integrity system architecture which support hardware threads displays:
Primary bootpath : 0/3/2/0.0x50001fe15002c7f9.0x4001000000000000
(/dev/rdisk/disk7)
HA Alternate bootpath : 0/1/1/1.0x0.0x0 (/dev/rdisk/disk10)
Alternate bootpath : 0/1/1/0.0x1.0x0 (/dev/rdisk/disk9)
Autoboot is ON (enabled)
Hyperthreading : ON
: ON (next boot)
SpeedyBoot
1. Display all current stable storage values.
setboot -v
on PA-RISC architecture displays:
Primary bootpath : 0/0/0/3/0.0x5.0x0 (/dev/rdisk/disk3)
HA Alternate bootpath : 0/0/0/3/0.0x6.0x0 (/dev/rdisk/disk2)
Alternate bootpath : 0/0/0/3/0.0x6.0x0 (/dev/rdisk/disk2)
Autoboot is ON (enabled)
Autosearch is OFF (disabled)
TEST CURRENT SUPPORTED DEFAULT NEXT BOOT
---- ------- --------- ------- ---------
all partial partial partial partial
SELFTESTS partial yes on partial
early_cpu off yes on off
late_cpu on yes on on
FASTBOOT partial yes on partial
full_memory off yes on off
PDH on yes on on
CEC off no off off
on Integrity system architecture displays:
Primary bootpath : 0/1/1/0.0x1.0x0 (/dev/rdisk/disk9)
HA Alternate bootpath : 0/1/1/1.0x0.0x0 (/dev/rdisk/disk10)
Alternate bootpath : 0/1/1/1.0x0.0x0 (/dev/rdisk/disk10)
Autoboot is ON (enabled)
TEST CURRENT DEFAULT
---- ------- -------
all partial partial
SELFTESTS off on
early_cpu off on
late_cpu off on
6 Hewlett-Packard Company − 6 − HP-UX 11i Version 3: September 2010